ページを印刷する
Problem solving guide
Repair work to electrical appliances should only be carried out by a suitably
qualified person in accordance with local and national regulations.
Unauthorised repairs could be dangerous.
What to do if . . .
. . . the programme does
not begin:
. . . the "Check water inlet /
outlet indicator light is flash-
ing:
Cause . . .
There is no power.
The "ON" indicator light has not
lit up.
There is power and the "ON"
indicator is lit up, but the
programme selector has not
been turned to the "Finish /
Start" position.
The water inlet is blocked,
but the programme has run
normally.
The water inlet system is
blocked.
The "Finish" light is on in the
display sequence, but the load
in the machine has not been
washed.
The water outlet is blocked.
Problem solving guide
Remedy . . .
Check that:
–
the door is properly closed.
–
the plug is plugged in, and
the socket switch is on.
–
the fuse or circuit breaker
has not tripped.
–
Turn the programme selector
to the "Finish / Start" position.
–
Select a programme.
–
The stopcock is not opened
far enough.
–
The inlet hose is kinked.
–
The water pressure is too
low. Call the Service dept.
–
Turn the programme selector
to "Finish / Start".
–
Open the stopcock.
–
Select a programme.
–
Clean the fluff filter and drain
pump.
–
Has the drain pump been
fitted too high? (max, drain
head 1 metre).
29