- ページ 26

洗濯機 Miele PW 6167のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Miele PW 6167 40 ページ。
Miele PW 6167 にも：マニュアル (48 ページ)

ページを印刷する

Problem solving guide

Possible reasons for increased levels of

foaming

– Detergent type

^ Only use detergents formulated for commercial

washer-extractors. Domestic laundry detergents

are not suitable.

– Using too much detergent

^ Follow the manufacturer's dosage

recommendations on the packaging and take local

water hardness levels into account.

– Heavy foaming detergent

^ Use a low foaming detergent or contact your

detergent supplier for advice.

– Very soft water

^ In areas with very soft water (hardness level 1)

dispense less detergent as specified by the

detergent manufacturer.

– Soiling level of the laundry

^ For lightly soiled laundry dispense less detergent in

accordance with the detergent manufacturer's

instructions.

– Residues e.g. detergent on the laundry

^ Run a pre-wash without detergent and without

selecting a temperature.

Laundry which has been soaked before washing

must be thoroughly rinsed before running a wash

programme.

– Small loads

^ Reduce the amount of detergent dispensed

according to the size of the load.

– Drum speed too high during the wash

(Profitronic controls)

^ Reduce the drum speed and the wash rhythm.

– Gas-heated washer-extractors

On gas heated machines the suds solution is

pumped around the heater elements. This additional

movement of the suds can produce extra foam.

^ Follow the dispensing instructions given above.

^ Use a low lather detergent.

^ On Profitronic controlled machines and in special

circumstances it is possible to reduce the drum

speed and the wash rhythm during the heating-up

phase.

Large articles of laundry stretching

during the spin cycle

Large articles of laundry (e.g. table cloths) can

stretch during the spin cycle. This can generally be

prevented by reprogramming the machine.

Please contact the Miele Service Department.

Service interval

If, after switching the machine on, the following

message appears in the display, the machine will

need to be serviced by the Miele Service

Department.

Service interval 1

Call the Service Department

The display will go out after 5 minutes.