- ページ 6
コントローラー ALLLED DynColor DC300-RL-RGB-PAのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。ALLLED DynColor DC300-RL-RGB-PA 6 ページ。 Dyncolor 300-rl rgb dmx controllers
ページを印刷するPage 6 of 6
7) How to set the DMX controller under DMX512 DECODER mode?
Under DMX512 DECODER mode, the DMX controller occupies 3 channels/addresses. The first
channel/address is for adjusting brightness of red color; the second channel/address is for adjusting
brightness of green color; the third channel/address is for adjusting brightness of blue color.
① Set DMX controller to DMX512 DECODER mode;
② Set DMX channel/address for the DMX controller: if the DMX channel/address is set to 13, the
controller will occupy channel/address 13, 14 & 15; if the DMX channel/address is set to 128, the
controller will occupy channel/address 128, 129 & 130;
③ Manage the first channel/address on the DMX console, like 13 or 128, to adjust the brightness of red
color;
④ Manage the second channel/address on the DMX console, like 14 or 129, to adjust the brightness of
green color;
⑤ Manage the third channel/address on the DMX console, like 15 or 130, to adjust the brightness of
blue color.
QUALITY WARRANTY
This product is sold pursuant to ALLLED Standard Terms and Conditions which can be found
at
www.allled.com
exclusions and limitations on ALLLED liability for damages, and restrictions on available remedial
actions.
For any after-sales assistance, please contact our Customer Service Team at [email protected]. All your
concerns and requests will be handled within 24 hours.
97 E 200 N
American Fork Utah 84003
www.allled.com
E-mail:
Phone: 1-855-525-5533
and which contain important provisions, including, among others, the Quality Warranty,
ALLLED LLC.
Light your world
Color your life!