- ページ 6
洗濯機 Miele W 820のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Miele W 820 40 ページ。 Novotronic
Miele W 820 にも： 取扱説明書 (41 ページ)
ページを印刷する
Before using for the first time
Important:
the appliance must be properly in-
stalled and connected to the water
and electricity supply according to
local and national regulations.
For further information read the instruc-
tions on pages 31 - 37
Check that the transit fitting at the
rear has been removed.
Before using for the first time prime
the ball valve as follows:
Switch on the machine.
Turn the selector switch to "Starch".
Once the drum starts turning: set the
programme selector to "Drain".
When the water has drained: turn the
programme selector to the "Fin-
ish/Start" position.
Switch the machine off.
The ball valve is operational.
Any residual lubricants and water
from testing still in the machine
should be flushed out as follows:
Do not load any laundry in the ma-
chine.
Add a little detergent to compart-
ment j.
Switch on the machine.
Turn the programme selector switch
to the "Cottons 60°C" programme.
Press the "Short" button.
The residues will have been flushed
out once the programme has fin-
ished.
6
All manuals and user guides at all-guides.com
Water hardness reminder.
The amount of detergent will depend
on various factors including the water
hardness level in your area. Set the
water hardness dial located in the
detergent dispenser box as a reminder.
Turn the dial to the required setting.
Use the spatula supplied with the
machine. It is located at the rear of
the dispenser drawer facia (see
page 23).
If you do not know how hard the water
is in your catchment area, please con-
tact your local water authority.
Water hardness
Hardness
water
mg/litre
range
1
soft
up to 135
2
medium
up to 250
3
hard
up to 380
4
very hard
over 380
Clake's
°dH
scale
(German)
up to 10°
0-7°
10°-20°
7°-14°
20°-25°
14°-21°
over 25°
over 21°