- ページ 23
食器洗い機 Miele G 1202のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Miele G 1202 46 ページ。
Miele G 1202 にも： マニュアル (14 ページ)
ページを印刷するG 1xxx/G 2xxx
Function
Country setting
Table 13: Service Programming Mode, G 1472/G 2472
1
In machines with software version -876, run the update "Optimized cleaning of tea
residues in Sensor Wash program" (mat. no. 06471560). Modified threshold values will
improve the cleaning outcome.
2
If the electronic needs to be replaced during servicing, the following steps must be taken
during programming: In the first step, set the country specification and model, then switch
off the appliance. Repeat access and then set appliance width and height, and the
appropriate supply water hardness.
3
The SER country specification includes the following countries: Portugal, France, the
Netherlands, Belgium and Great Britain.
Save and quit:
Switch off the appliance.
Water Hardness [°d]
37 – 50
51 – 60
61 – 70
Table 14: Water Hardness Settings, G 1472/G 2472
Note:
If the dishwasher is connected to an external ion exchanger water softener (i.e.
that needs to be regenerated with salt), the water hardness delivered by the
system must be set. If this value is unknown, set to 8°d (8.6 grains per gallon).
2.6
Advanta - G 2020
Initial requirements:
1. Close the door.
2. Switch off the appliance.
3. Turn the selector switch to the 12 o'clock position.
Accessing:
1. Press and hold the Start/Stop button.
2. Switch on the appliance.
Programming
Press the options button
39x. The "Tab" LED
flashes 3x slowly and 9x
2
quickly intermittently.
Press the Program button
as appropriate to make the
desired setting.
Water Hardness [gpg]
1
2
3
...
36
23
Display
The display shows p and a digit
alternately. The following countries
can be set: p1 = EUR (Europe); p2 =
AUS (Australia); p3 = USA; p4 =
JPN (Japan); p5 = I/E (Italy/Spain);
p6 = SER (Southern Europe).
1.1
2.1
3.2
...
38.5
39.6 – 53.5
54.6 – 64.2
65.3 – 74.9
Technical Information
3
Display
P1
P2
P3
...
P36
P50
P60
P70