- ページ 18
食器洗い機 Miele G 542 UのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Miele G 542 U 36 ページ。
Miele G 542 U にも： 取扱説明書 (37 ページ)
ページを印刷する
Switching on
Interrupting a program
For example,
when
articles
in the
dishwasher
rattle or bump
against
each other during a program and have
to be rearranged.
@® Press the "Door release"
button
and open the door. The program
cycle is automatically interrupted,
@ Replace the articles securely and
correctly.
@® Leave the door ajar for a few min-
utes, especially if the water is hot.
Then:
® Close the door. The program will
continue from the point at which it
was interrupted.
Switching off
Switching off
On completion of a program:
@® Set
the
program
selector
to
"Stop". The program sequence in-
dicator
moves
directly
to
the
"Start" position. The "On" indica-
tor light will go out.
@ Turn off the water valve.
During maintenance, or if there is to
be a long interval before next use of
the dishwasher, turn the program se-
lector to "OQ".
Unloading the machine
You should allow 15 minutes
after
completion of the program for the load
to cool down.
Then
open
the door. The bottom
basket should be cleared before the
top basket.
Drops of water may remain in the bot-
tom of some dishes (such as cups or
bowls) after drying.
Unloading the top basket first could
cause drops of water to fall on to dry
articles in the bottom basket.
Consequently, it is best to unload
the bottom basket first.
lf the door is opened a fraction at the
end of the program, the load will cool
down
within a few minutes. The di-
shes can then be removed dry.