- ページ 16

食器洗い機 Miele G 643のPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Miele G 643 28 ページ。 Integrated dishwasher
Miele G 643 にも：取付説明書 (40 ページ), 取付説明書 (28 ページ), 取付説明書 (40 ページ)

ページを印刷する

1. Adjusting the Door Springs

When fitted the door front can be ad-

justed up to a maximum of 2 mm up-

wards or downwards to match adjoining

unit fronts.

^ Open the dishwasher door slightly.

^ With the door open, press the front

panel on one side against the door

outer panel.

^ Adjust the height of the door front on

this side using the lower recessed

adjusting screw (TORX T20).

higher = turn clockwise

lower = turn anti-clockwise

^ Then secure the door front on this

side by tightening the upper re-

cessed fixing screw (TORX T20) at

the side of the machine door outer

panel.

^ Repeat the process on the other side

of the door.

^ Close the dishwasher door.

^ Check the alignment of the door

panel again.

^ If it is not correctly aligned you may

need to loosen the screws and re-ad-

just it to the correct alignment.

Once satisfied that the alignment is cor-

rect:

^ Open the dishwasher door.

^ Tighten all fixing screws (upper

screws, TORX T20) at the sides.

^ Plug fixing screw and height adjust-

ment screw recesses with the plastic

stoppers supplied.