- ページ 10
食器洗い機 Miele G 643SC-ViのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Miele G 643SC-Vi 28 ページ。 60 cm wide fully integrated dishwasher
ページを印刷するTo ensure stability, the dishwasher must
be fixed securely to the worktop (step
5). Two securing pieces are supplied
for this purpose.
^ Fit the securing pieces into the slots
on both the left and right hand sides.
Granite and marble worktops:
With these worktops the dishwasher
must be securely screwed to neigh-
bouring units on the right and left hand
sides. For this you will require two spe-
cial fixing brackets (these are included
in the accessory pack together with fit-
ting instructions and screws).
The angle support for the water drain-
age hose at the rear of the dishwasher
can be turned.
^ Turn the angle support in the direc-
tion of the on-site connection for the
drainage hose.
10
^ Push the dishwasher right back into
the recess. Ensure that the drain
hose, inlet hose and the electric ca-
ble are laid to reach the connection
point without any kinks.
Make sure that the left side of the re-
flector panel is sited above the
in-operation light in the dishwasher
control panel. To check, switch on
the dishwasher, select a programme
and close the door. The light is visi-
ble when the dishwasher has been
aligned correctly.
If it does not light up re-align the
dishwasher in the niche.