- ページ 18

オーブン Miele CS 1028のPDF 操作およびインストール手順をオンラインで閲覧またはダウンロードできます。Miele CS 1028 44 ページ。 Combiset
Miele CS 1028 にも：操作およびインストール手順 (44 ページ), 変換手順 (40 ページ), 操作およびインストール手順 (44 ページ), 操作およびインストール手順 (44 ページ)

Frequently asked questions

Repairs should only be carries out by an authorized technician in

accordance with local and national safety regulations. Unauthorized repairs

could cause injury or appliance damage. The manufacturer cannot be held

responsible for unauthorized work.

The burner does not ignite after several attempts.

Possible fault

The burner is not assembled correctly.

The gas supply is not turned on.

The burner is dirty.

The flame holes are wet or blocked.

The flame does not stay lit.

Possible fault

During the ignition process, the flame needs to touch the ignition safety control

so that it heats up. If the flames does not touch, check that:

– The burner is seated correctly.

– There is no soiling on the ignition

safety control.

The igniter does not spark.

Possible fault

The circuit breaker has tripped.

Food has deposited itself between the

ignitor and the burner cap.

Food has deposited on the ignition

safety control.

The flame appears different than usual.

Possible fault

The burner is assembled incorrectly.

Solution

See "Cleaning and Care -

Reassembling the burner".

Turn on the gas supply.

See "Cleaning and care".

Solution

See "Cleaning and Care -

Reassembling the burner".

Solution

Re-set the circuit breaker. Contact an

electrician for assistance if in doubt.

See "Cleaning and care".

Solution

Reassemble the burner as shown in

"Cleaning and Care - Burner".