- ページ 13

オーブン Miele CS 1028のPDF 操作およびインストール手順をオンラインで閲覧またはダウンロードできます。Miele CS 1028 44 ページ。 Combiset
Miele CS 1028 にも：操作およびインストール手順 (44 ページ), 操作およびインストール手順 (44 ページ), 変換手順 (40 ページ), 操作およびインストール手順 (44 ページ)

Adjusting the flame

The burner can be variably adjusted

between the lowest and highest flame

by turning the control knob.

Since the outer portion of the flame is

much hotter than the center, the flame

should be set so that its tips do not

spread beyond the sides of the pan.

Flame tips which extend beyond the

sides of the pan are hazardous.

Turning off

^ Turn the control clockwise to "ß".

This stops the flow of gas and the flame

goes out.

Using the cooktop during a

power failure

If there is an interruption to the

electrical supply, the gas can be

ignited using a match.

^ Press the control knob down and turn

it counterclockwise to the ignition

position.

^ While holding down the knob, light

the gas at the burner with a match.

When the flame appears, keep the

control knob pressed in for

8 - 10 seconds to allow the Ignition

Safety Control to reach operating

temperature.

Operation