- ページ 5
コントロールユニット Allmatic CT INVERTER AMのPDF 設置マニュアルをオンラインで閲覧またはダウンロードできます。Allmatic CT INVERTER AM 12 ページ。 Programmable control board for sliding gates with inverter technology
ページを印刷する
LANGUAGE SETTING
Press key P3 for 2 seconds. Confirm with key P2.
3 Programming Menu
This procedure must be carried out ONLY by the installer and ONLY during the installation of the system.
WARNING: the motor must be still, preferably in closed position, in order to access the programming menu!
3.1 Activation and selection of the programming menu
The control unit CT INVERTER AM is equipped with THREE user menus (MENU A, MENU B, MENU C), by which it is possible to regulate, program
and modify all functional parameters. Follow the indications on the display during the programming phases.
MENU A - allows to activate the optional functions and to select the intervention modalities of the security systems.
MENU B - it is dedicated to the learning of the runs, to the operations related to the manual movement and to the regulation of the control
parameters of the motor
MENU C - menu for auxiliary configurations for user's support
Stop the motor and get in safety conditions
1
Press and keep pressed key P1 for 2 seconds in order to
activate MENU A
2
Press and keep pressed key P2 for 2 seconds in order to
activate MENU B
Press and keep pressed key P3 for 2 seconds in order to
activate MENU C
Select an entry of the menu (see following table); shortly press key
3
P3 to scroll down to the following index, or key P1 to go back to
the previous menu
4
Confirm the entry selected by pressing key P2
Modify the status of the parameter by following the
5
indications written in the second line of the display by using
keys P1 e P3.
Confirm the setting selected by pressing key P2
6
It is possible to modify other parameters (go back to point 3) or to
7
exit the programming menu by selecting the option EXIT
(confirm by pressing key P2)
AUTOMATIC EXIT FROM THE MENU: the menu exits automatically in case of long inactivity (longer than 15 seconds)
6-1622595
rev.06
13/01/2017
It is suggested to select the language before any other operations
Some parts of the control unit are subject to dangerous voltages!
Pay attention during the phase of manual accessing to the control board
ITA
ENG
Select the language by pressing either P1 or P3.
Confirm with key P2
The display must not show any indications
8888888888888888
8888888888888888
8888888888888888
8888888888888888
8888888888888888
8888888888888888
The display shows the entry selected.
The first line of the display shows the present setting for
the function selected.
The second line of the display shows the possible
modification settings according to the parameter
selected (see specific paragraphs)
The first line of the display shows the present setting for
the function selected.
The second line of the display shows the possible
modification settings according to the parameter
selected (see specific paragraphs)
The display indicates the correct storage of data and then
shows the entry selected
Exit from the menu is confirmed by the absence of
indications on the display
FRA
ESP
DEU
POR
The display shows the
first entry available
5 / 12