ページを印刷する
a 1 exhaust socket
for 150 mm or 125 mm exhaust
ducting (not to be used with
recirculation mode).
b 1 non-return flap
for fitting into the exhaust socket
(not to be used with recirculation
mode).
c 2 brackets
for securing the cooker hood to the
wall (not required when installed
underneath the wall unit).
d 1 drilling template
e 1 cover foil
for rear exhaust opening when using
recirculation mode. The foil is
included with the charcoal filter
(optional accessory).
4 screws, 5 x 60 mm and
4 plugs, 8 x 50 mm
for securing to the wall.
The screws and plugs are
designed for use in solid walls only.
For other types of wall construction,
alternative fixings will be required.
Make sure the wall is able to take the
weight of the cooker hood.
4 self-tapping screws 4.2 x 30 mm
for securing the cooker hood to a wall
unit (from above).
4 wood screws 4 x 30 mm
for securing the cooker hood to the
wall unit (from below).
4 cover caps
Installation
27