- ページ 22

換気フード Miele DA 1260のPDF 操作およびインストール手順をオンラインで閲覧またはダウンロードできます。Miele DA 1260 44 ページ。
Miele DA 1260 にも：操作およびインストール手順 (48 ページ), 操作およびインストール手順 (44 ページ), 操作およびインストール手順 (44 ページ)

Cleaning and care

Changing a light bulb

The bulbs should be replaced with the

following:

Bulb type .............................. LED, GU10

Power ............................................... 3W

Replacement bulbs are available from

Miele.

 Turn off the blower and the lighting.

 Remove the grease filters.

 Disconnect the hood from the

electrical supply before replacing the

bulbs (see "IMPORTANT SAFETY

INSTRUCTIONS").

While the light is turned on, the bulbs

become very hot.

Allow the bulbs to cool down for a

few minutes before changing them.

 Loosen the lamp's securing screw a

little.

 Slide the screw and the lamp

downwards.

 Then tighten the screw again.

 Turn the bulb counter-clockwise and

pull it out.

 Install the new bulb. Observe the

manufacturer's instructions.

 Slightly loosen the screw again, push

the light upwards, and tighten the

screw.

 Reinstall the grease filters.