- ページ 18

換気フード Miele DA 2050のPDF 操作および設置マニュアルをオンラインで閲覧またはダウンロードできます。Miele DA 2050 28 ページ。 Cooker
Miele DA 2050 にも：操作およびインストール手順 (28 ページ)

Installation

(Air extraction mode only)

^ If a non-return flap is not present in

the venting system, the non-return

flap supplied must be fitted onto the

exhaust socket in the motor unit. The

flaps must open upwards.

The cooker hood is intended to be built

into wall units, cooker hood housing

units, and above breakfast bars or

island areas.

Check prior to installation that the top of

the appliance will be accessible after

installation.

If this is not the case, install the exhaust

ducting and prepare the electrical

connection before installation.

^ Place the appliance in the cut-out

from below and align it.

^ Secure the cooker hood by the frame

using 3.5 x 16 mm screws.

^ Before using the appliance for the

first time, take the grease filters out

and remove the protective foil from

the filter frame. Then replace the

grease filters.