- ページ 24

換気フード Miele DA 219-2のPDF 操作およびインストール手順をオンラインで閲覧またはダウンロードできます。Miele DA 219-2 40 ページ。 Ventilation system
Miele DA 219-2 にも：操作およびインストール手順 (44 ページ)

There are three retaining plates A, B

and C for fixing the cooker hood to the

wall.

First of all drill the holes for attaching

the canopy and for fitting retaining

plate A.

Before fitting the retaining plate draw

a vertical line centrally above the

hob on the back wall.

Mark measurement S from the hob

surface upwards (see "Appliance

dimensions"). This marks the height

of the lower rim of the cooker hood.

DA 216-2 / EXT, 217-2:

Drill an 8 mm ø hole on the middle

line 18 mm above the height marked

. Insert an S8 plug into the hole.

DA 219-2 / EXT:

Drill two 8 mm ø holes, 18 mm above

the height marked

right and left of centre. Insert S8

plugs.

Drill two 8 mm ø holes, one at

100 mm and one at S + 425 mm on

the centre line for the retaining plate

(see "Appliance dimensions"). Insert

S8 plugs.

and 250 mm