- ページ 13
換気フード Miele DA 2250 EXTのPDF 操作およびインストール手順をオンラインで閲覧またはダウンロードできます。Miele DA 2250 EXT 40 ページ。 Cooker
Miele DA 2250 EXT にも： 操作および設置マニュアル (40 ページ), ユーザーマニュアル (40 ページ), 操作およびインストール手順 (40 ページ)
ページを印刷する
The cooker hood is operated by pulling
out and pushing in the deflector plate.
To switch the fan on
^ Pull out the deflector plate.
The fan will begin to operate at setting II.
The On/Off indicator lamp and the 2nd
– / + power level indicator lamp will
light up.
If the cooker hood has been
connected to a window contact
switch via the Miele DSM 400 control
module, then the fan cannot be
switched on if the window is shut.
The indicator lamp will flash.
To select a power level
^ Use the – / + controls to select the
power level required.
The indicator lamps show which power
level has been chosen.
Depending on the intensity of the
cooking vapours, levels "I" to "III" are
usually sufficient for normal cooking.
For short periods of cooking food with
intensive vapours and a strong aroma,
e.g. when searing meat, you may wish
to select the Intensive Setting "IV".
Pull the deflector plate right out to
achieve optimum extraction and to
prevent unnecessary noise levels.
To switch the fan off
^ Push the deflector plate back in. The
next time the deflector plate is pulled
out, the cooker hood will operate at
power level II again.
or
^ Press the On/Off touch control for the
fan
All the indicator lamps will go out.
To switch the lighting on
^ Pull out the deflector plate.
or
^ Press the touch control for the
lighting again.
When the lighting is switched on, the
indicator lamp lights up.
To switch the lighting off
^ Push the deflector plate back in.
or
^ Press the touch control for the
lighting.
The indicator lamp will go out.
Operation
13