- ページ 28
換気フード Miele DA 2390のPDF 操作およびインストール手順をオンラインで閲覧またはダウンロードできます。Miele DA 2390 36 ページ。 Ventilation system
Miele DA 2390 にも: 操作およびインストール手順 (40 ページ), 操作およびインストール手順 (40 ページ), 操作およびインストール手順 (36 ページ), 操作およびインストール手順 (40 ページ), 操作およびインストール手順 (36 ページ)
Installation
Installation recommendations
– If positioned too high, extraction will
be inefficient.
– To achieve optimum vapour
extraction, the rangehood must be
centred over the cooktop, not to the
side or behind it.
– The cooktop should be no wider than
the rangehood and, if possible, it
should be narrower, especially for
safety distances greater than
750 mm.
– The installation area must be easily
accessible. The rangehood should be
easily accessible and easy to
dismantle in the event that service is
required. This should be taken into
consideration when planning the
position of cupboards, shelves,
ceilings or features in the vicinity of
the rangehood.
28
Uneven installation surfaces
If the installation surface is uneven
making flush installation difficult, the
frame can be realigned.
Fit the rangehood as described in the
installation sheet.
Disconnect the rangehood from the
mains electrical supply before
replacing the lamps (see "Warning
and Safety instructions").
Insert the lever supplied into the gap
between the lamp and the lamp
holder.
The lamp will then drop downwards.
Grip the lamp, turn it anti-clockwise
and take it out.
Remove all other lamps in the same
way.