- ページ 24

換気フード Miele DA 2390のPDF 操作およびインストール手順をオンラインで閲覧またはダウンロードできます。Miele DA 2390 36 ページ。 Ventilation system
Miele DA 2390 にも：操作およびインストール手順 (40 ページ), 操作およびインストール手順 (40 ページ), 操作およびインストール手順 (36 ページ), 操作およびインストール手順 (40 ページ), 操作およびインストール手順 (36 ページ)

Installation



Before installation, it is important

to read the information contained in

this chapter and in the "IMPORTANT

SAFETY INSTRUCTIONS" chapter.

The ventilation hood is intended for

installation in wall cabinets, ventilation

housing units, vent flues or above

kitchen islands.

 Before installing, check to make sure

that the top of the appliance will be

accessible once it is installed.

If this is not the case, install the exhaust

ducting and prepare the electrical

connection before installation.

1 non-return flap

for fitting into the exhaust socket on

the motor unit (not needed for

recirculation mode). Depending on the

model, the non-return flap may already

be mounted.

4 M5 x 40 mm screws, 4 washers,

4 M5 nuts for securing the ventilation

hood to an interim shelf

10 M4 x 8 mm screws to secure the

ventilation hood

4 M4 x 12 mm screws for additional

securing of the ventilation hood to

uneven surfaces

Conversion kit for recirculation

mode

including directional unit, hose, and

hose clips (not supplied, but available

as an optional accessory. See

"Technical data").