- ページ 33

換気フード Miele DA 3160のPDF 操作およびインストール手順をオンラインで閲覧またはダウンロードできます。Miele DA 3160 40 ページ。 Ventilation system
Miele DA 3160 にも：操作およびインストール手順 (36 ページ), 操作およびインストール手順 (40 ページ), 寸法 (1 ページ), 操作およびインストール手順 (40 ページ), 操作およびインストール手順 (40 ページ), 操作およびインストール手順 (40 ページ)

ページを印刷する

All electrical work should be

undertaken by a suitably qualified

and competent person in strict

accordance with current national

and local safety regulations

(BS 7671 in the UK).

Installation, repairs and other work

by unqualified persons could be

dangerous, for which the

manufacturer cannot be held liable.

Ensure power is not supplied to the

appliance until after installation or

repair work has been carried out.

Do not connect the appliance to the

mains electricity supply by an

extension lead. These do not

guarantee the required safety of the

appliance.

. This is visible when the

grease filters have been removed.

Ensure that this data matches the

household mains supply.

Connection of this appliance should be

made via a suitable isolator or a double

pole fused spur connection unit which

complies with national and local safety

regulations and the On-Off switch

should be easily accessible after the

appliance has been built in.

When switched off there must be an

all-pole contact gap of 3 mm in the

switch (including switch, fuses and

relays according to EN 60335).

If the switch is not accessible after

installation (depending on country), an

additional means of disconnection must

be provided for all poles.

For extra safety it is advisable to install

a residual current device (RCD) with a

trip current of 30 mA.

U.K., IRL, NZ, ZA: This appliance is

supplied for connection to an a.c.

230 V single phase 50 Hz supply.

AUS: This appliance is supplied for

connection to an a.c. single phase

240 V, 50 Hz supply.

The wires in the mains lead are

coloured in accordance with the

following code:

Green/yellow = earth

Blue

= neutral

Brown

= live