- ページ 29

換気フード Miele DA 3160 EXTのPDF 操作およびインストール手順をオンラインで閲覧またはダウンロードできます。Miele DA 3160 EXT 40 ページ。 Cooker hoods
Miele DA 3160 EXT にも：操作およびインストール手順 (40 ページ), 操作およびインストール手順 (40 ページ)

ページを印刷する

^ Remove the protective strip around

the edge of the grease filter.

Replace the grease filter.

^ To do this, pull the deflector plate

out.

^ Turn the grease filter so that the red

plastic guides are at the front and

facing upwards.

^ Replace the grease filter in the front

of the deflector plate, press it

upwards and push it in together with

the deflector plate. It will slide onto

the fixing pins at the back. Finally,

push the grease filter back a little

more.

Set up for extraction mode

^ If the on-site ventilation system does

not have a non-return flap, then the

non-return flap supplied with the

appliance must be fitted in the

exhaust socket in the motor unit.

^ The appliance is set up for use with

C 150 mm ducting. If C 125 mm

ducting is required, the reducing

collar supplied must be fitted to the

exhaust socket (see section

"Connection for air extraction").

^ Secure the ventilation ducting over

the exhaust socket on the cooker

hood using a hose clip.

^ See "Connection for air extraction" for

further instructions on fitting the

ducting.

Installation