- ページ 23

換気フード Miele DA 3190のPDF 操作およびインストール手順をオンラインで閲覧またはダウンロードできます。Miele DA 3190 40 ページ。 Ventilation system
Miele DA 3190 にも：操作およびインストール手順 (36 ページ), 操作およびインストール手順 (40 ページ), 寸法 (1 ページ), 操作およびインストール手順 (40 ページ), 操作およびインストール手順 (40 ページ), 操作およびインストール手順 (40 ページ)

a 1 exhaust connection for exhaust

ducting C 150 mm.

b 1 non-return flap

for fitting into the exhaust socket on

the motor unit (only for air extraction

mode).

Depending on model, the non-return

flap may already be fitted.

c 2 brackets

to support the appliance in the wall

unit.

d 1 spacer strip

to conceal the gap between the rear

of the appliance and the wall.

e Conversion kit for recirculation

mode

including exhaust grille and flexible

aluminium hose with clips (the

conversion kit is not supplied with the

rangehood but is available as an

optional accessory; see "Technical

data").

f DML 300 installation kit (optional

accessory)

contains hinging and screws for

fixing a lightshield to match kitchen

furniture (lightshield not supplied with

rangehood)

8 screws 3.5 x 16 mm

for securing the rangehood into the wall

unit.

8 screws M4 x 12 mm

for securing the rangehood to the

brackets.

4 of the screws can be used instead of

the plastic rivets to secure the spacer

strip.

2 screws 4 x 30 mm

for securing the rangehood at rear wall.

4 plastic rivets

for securing the spacer strip to the

back of the appliance.

Installation