- ページ 40

換気フード Miele DA 3466のPDF 操作およびインストール手順をオンラインで閲覧またはダウンロードできます。Miele DA 3466 48 ページ。
Miele DA 3466 にも：操作およびインストール手順 (48 ページ), 操作およびインストール手順 (48 ページ), 操作およびインストール手順 (48 ページ), 操作およびインストール手順 (48 ページ)

Installation

Set up for recirculation mode

If site conditions are not suitable for the

hood to be used with air extraction, the

appliance must be set up for

recirculation. The DUU 151 conversion

kit, available from Miele, is required for

operating the hood in recirculation

mode. You will also need a charcoal

filter (see "Technical data").

A non-return flap is not used in

recirculation mode. Depending on the

model, it is already installed.

 Remove the non-return flap from the

exhaust connection.

 Install the conversion kit as described

in the installation instructions

supplied with the kit. Make sure that

the slats in the exhaust grille point

towards the centre of the room and

not towards a wall or the ceiling.

A non-return flap is not used in

recirculation mode.

 Insert the charcoal filter (see

"Cleaning and care").