- ページ 26

換気フード Miele DA 3480のPDF 操作および設置マニュアルをオンラインで閲覧またはダウンロードできます。Miele DA 3480 40 ページ。 Ventilation system
Miele DA 3480 にも：操作および設置マニュアル (40 ページ), 取付説明書 (24 ページ)

ページを印刷する

Installation

Positioning the appliance in

the wall housing unit

To position the appliance correctly,

cut the spacer strip to required depth

T, and then attach it to the back of

the appliance.

T= Depth of carcase K minus depth of

appliance G

^ Example

shows the installation

without a front panel fitted and with

the front edge of the deflector plate

flush with the front edge of the

furniture housing unit. This installation

needs a shelf 95 mm deep.

^ Example

shows the installation

with a front panel to match the

kitchen furniture. This installation

requires dimension b for the front

panel plus 5 mm for the DML 400

fixing kit to be added to the shelf

dimension (95 mm + 5 mm +

dimension b).

The remaining installation gap must be

at least 180 mm in depth.

If it is less than 180 mm, position the

appliance further back, and reduce

measurement T accordingly.

The position of the deflector plate can

be adjusted in depth by a maximum of

35 mm at the front.

^ Cut the spacer strip supplied to

measurement T.

Score along the groove for the

smaller measurement as shown, and

remove the surplus.

^ Screw the spacer strip underneath

the housing unit sides, flush with the

rear wall.

^ Draw a vertical line up both inside

walls of the housing from the front of

the spacer strip.