- ページ 24

換気フード Miele DA 3496のPDF 操作およびインストール手順をオンラインで閲覧またはダウンロードできます。Miele DA 3496 48 ページ。
Miele DA 3496 にも：操作およびインストール手順 (48 ページ), 操作およびインストール手順 (48 ページ), 操作およびインストール手順 (48 ページ)

Cleaning and care

Changing a lamp

The lamps should be replaced with the

following:

Manufacturer................................ EGLO

Lamp type .................................... GU10

Specification ................................ 11427

Wattage ........................................... 3 W

These lamps are available from Miele or

from specialist retailers.

 Pull out the deflector plate, and

remove the grease filter as described

earlier.

 Switch off the fan and the lighting.

Note that lamps become very hot

when in use.

They can cause burns even after

being switched off for some time.

Allow the lamps to cool down for a

few minutes before changing them.

 Remove the charcoal filter if the

rangehood is being used in

recirculation mode.

 Disconnect the rangehood from the

mains electrical supply before

replacing the lamps (see "Warning

and Safety instructions").

 Push down the lighting unit slightly

via the opening in the safety panel.

 Turn the lamp anti-clockwise and pull

it out.

 Screw the new lamp into the socket

and push it upwards. Please follow

the manufacturer's safety

instructions.

 Replace the grease filter and, if being

used in recirculation mode, the

charcoal filter.