- ページ 42
換気フード Miele DA 3560のPDF 操作およびインストール手順をオンラインで閲覧またはダウンロードできます。Miele DA 3560 44 ページ。 Cooker hood
ページを印刷するOperation with Control module DSM 400
The Miele DSM 400 control module
(optional accessory) can be used to
combine the cooker hood with other
components.
It enables the following:
Potential free connection
This can be used to operate another
appliance by pulling out the deflector
plate and using the On/Off button s of
the cooker hood.
The potential free contact on the
DSM 400
can, for example, be used
in a cooker hood with an external motor
...EXT, which is connected to a central
ducting system.
The contact can then be used to
operate an electrically driven non-return
flap
which is connected to the
central extraction unit
42
.
Components used in the central
ducting system are not supplied by
Miele.
If in any doubt, the advice of a
competent builder or, for gas, a Gas
Safe installer must be sought.
Connection to a push button switch
The control module can be used to
switch on the cooker hood lighting
when the deflector plate is pulled out
via a push button switch in the house.
Installation
The control module must be installed at
the back of the the cooker hood
housing.
The electrical connection of
components to the control module
must be carried out by a suitably
qualified and competent person.