- ページ 13

換気フード Miele DA 362-110のPDF 操作およびインストール手順をオンラインで閲覧またはダウンロードできます。Miele DA 362-110 36 ページ。 Ventilation system
Miele DA 362-110 にも：操作およびインストール手順 (40 ページ), 操作およびインストール手順 (40 ページ)

ページを印刷する

A timer monitors the hours of operation.

The indicator for the grease filter will

light after 30 hours of fan operation. The

grease filters must then be cleaned.

After the grease filter has been cleaned

and put back in place, the grease filter

timer must be reset.

^ To do this press the grease filter

button for about 3 seconds.

The indicator will go out.

To change the hours of operation, see

"Reprogramming the timers".

The timer for the charcoal filter is not

preset. Please program this timer, see

"Operation / Reprogramming the

charcoal filter timer". The charcoal filter

indicator will light once the selected

time has elapsed. The

must then be replaced and the

charcoal filter timer must be reset.

^ To do this, press the charcoal filter

button for about 3 seconds.

The indicator will go out.

To check the percentage of time set

already used:

^ Press the joystick to the left to turn

the fan on.

^ Press the grease filter or charcoal

filter button.

The number of flashing indicators show

the percentage of programmed hours

that have been used.

1 indicator = 25 %

2 indicators = 50 %

3 indicators = 75 %

4 indicators = 100 %

This information will remain stored in

memory in the event of a power failure.