- ページ 31

換気フード Miele DA 403のPDF 操作およびインストール手順をオンラインで閲覧またはダウンロードできます。Miele DA 403 36 ページ。 Ventilation system
Miele DA 403 にも：操作およびインストール手順 (32 ページ), 製品寸法 (2 ページ), インストールマニュアル (2 ページ), 操作および設置マニュアル (36 ページ), 操作およびインストール手順 (32 ページ), 操作およびインストール手順 (36 ページ)

If the exhaust is ducted into an inactive

flue, the air must be expelled parallel to

the flow direction of the flue.

Never connect an exhaust hood to

an active chimney, dryer vent, vent

flue, or room venting ductwork.

Seek professional advice before

connecting an exhaust hood vent to

an existing, inactive chimney or vent

flue.

Important!

If the ductwork runs through rooms,

ceilings, garages, etc. where

temperature variations exist, it may

need to be insulated to reduce

condensation.

Condensate trap

optional accessory

In some cases, a condensate trap may

also be required to collect and

evaporate any condensate which may

occur. This optional accessory is

available for ducts 5" (125 mm) and 6"

(150 mm) in diameter.

When installing a condensate trap,

ensure that it is positioned vertically

and if possible directly above the

exhaust outlet. The arrow on the

casing shows the venting direction.

Air extraction