- ページ 23

換気フード Miele DA 406のPDF 操作および設置マニュアルをオンラインで閲覧またはダウンロードできます。Miele DA 406 40 ページ。 Cooker
Miele DA 406 にも：操作およびインストール手順 (36 ページ)

ページを印刷する

Cleaning the grease filters by hand

^ Clean the filters with a soft nylon

brush in a mild solution of hot water

and a little washing-up liquid.

Do not use:

– cleaning agents containing

descaling agents,

– powder cleaners, cream cleaners or

abrasive all-purpose cleaning

agents,

– oven sprays.

Cleaning the grease filters in the

dishwasher

^ Place the filters as upright as

possible in the lower basket, with the

short sides upright, and wash on a

65°C programme, ensuring the spray

arm is not obstructed. If a Miele

dishwasher is being used, select the

Sensor wash programme.

^ Use a mild dishwasher detergent.

Depending on the cleaning agent

used, cleaning the filters in a

dishwasher can cause permanent

discolouration to the surface.

However, this will not affect the

functioning of the filters in any way.

^ After cleaning, leave the filters to dry

on an absorbent surface before

replacing them.

When removing the filters for cleaning,

also clean off any residues of oil or fat

from the now accessible housing to

prevent the risk of these catching fire.

Cleaning and care

When putting the grease filters back in

position, ensure that the locking clips

are facing down towards the hob.

If the grease filters are inadvertently

replaced upside down, insert a small

screwdriver blade into the slits to

disengage the clip.

^ After replacing the grease filter,

press the grease filter touch control

for approx. 3 seconds to re-set the

operating hours counter.

The indicator lamp will go out.

If the grease filters are cleaned before

the operating hours counter has

reached its maximum, the grease filter

touch control should be pressed for

approx. 6 seconds to reset the counter.