- ページ 14

換気フード Miele DA 408のPDF 操作およびインストール手順をオンラインで閲覧またはダウンロードできます。Miele DA 408 36 ページ。 Ventilation system
Miele DA 408 にも：操作およびインストール手順 (36 ページ), 製品寸法 (2 ページ), インストレーション・インストラクション (1 ページ), 操作およびインストール手順 (36 ページ), 操作およびインストール手順 (36 ページ)

Operation

Filter timers

Grease filters

A timer monitors the hours of fan

operation. The indicator for the grease

filter will light after 30 hours of

operation. The grease filters must then

be cleaned.

After the grease filters have been

cleaned and put back in place, the

grease filter timer must be reset.

^ To do this, press the grease filter

button for approx. 3 seconds.

The indicator will go out.

Charcoal filter

Recirculation mode only

The timer for the charcoal filter is not

preset. Please program this timer, see

"Operation - Reprogramming the

charcoal filter timer".

The charcoal filter indicator will light

once the selected time has elapsed.

The charcoal filter must then be

replaced and the charcoal filter timer

reset.

^ To do this, press the charcoal filter

button for approx. 3 seconds.

The indicator will go out.

^ Press the On/Off button to turn the

fan on.

^ Press and hold the grease or

charcoal filter button.

The number of flashing "–/+" indicators

show the percentage of programmed

hours that have been used.

1 indicator = less than 25 %

2 indicators = less than 50 %

3 indicators = less than 75 %

4 indicators = less than 100 %

This information will remain stored in

memory in the event of a power failure.