- ページ 14
換気フード Miele DA 409のPDF 操作およびインストール手順をオンラインで閲覧またはダウンロードできます。Miele DA 409 36 ページ。 Ventilation system
Miele DA 409 にも： 操作およびインストール手順 (36 ページ), インストレーション・インストラクション (1 ページ), 製品寸法 (2 ページ), 操作および設置マニュアル (40 ページ), 操作およびインストール手順 (36 ページ), 操作およびインストール手順 (36 ページ), 操作およびインストール手順 (36 ページ)
ページを印刷する
Operation
FHter timers
Grease filters
A timer monitors the hours of fan
operation. The indicator for the grease
filter will light after 30 hours of
operation. The grease filters must then
be cleaned.
After the grease filters have been
cleaned and put in place, the grease
filter timer must be reset.
Checking
the fi_ter timers
To check the percentage of time
already used:
[] Press the On/Off button to turn the
fan on.
[] To do this, press the grease filter
button for about 3 seconds.
The indicator will go out.
CharcoaJ filter
Recirculation mode only
The timer for the charcoal filter is not
preset. Please program this timer, see
"Operation/Reprogramming
the
charcoal filter timer".
[] Press and hold the grease or
charcoal filter button.
The number of flashing "-/+" indicators
show the percentage of programmed
hours that have been used.
1 indicator
= less than
25 %
2 indicators
= less than
50 %
3 indicators
= less than
75 %
4 indicators
= less than 100 %
This information will remain stored in
memory in the event of a power failure.
The charcoal filter indicator will light
once the selected time has elapsed.
The charcoal filter must then be
replaced and the charcoal filter timer
reseL
[] To do this, press the charcoal filter
button for about 3 seconds.
The indicator will go out.
14