- ページ 26

換気フード Miele DA 424 V EXTのPDF 操作およびインストール手順をオンラインで閲覧またはダウンロードできます。Miele DA 424 V EXT 36 ページ。 With extended canopy
Miele DA 424 V EXT にも：操作およびインストール手順 (40 ページ), 製品寸法 (2 ページ), 操作および設置マニュアル (36 ページ), 操作およびインストール手順 (36 ページ), 操作およびインストール手順 (36 ページ), 操作およびインストール手順 (40 ページ)

ページを印刷する

1. Electrical Connection

Installation

Assembly parts

4 screws 8 x 60 mm with

4 washers and

4 plugs S 10 to secure the cover plate

to the ceiling

The screws and plugs are designed

for use in concrete ceilings.

For other types of construction,

alternative suitable fixings will be

required.

Make sure the ceiling is strong

enough to bear the weight of the

cooker hood.

2 spring clips to hang the cooker hood

onto the cover plate

4 countersunk screws M 6 x 20 mm

with locating bar and

4 self-locking nuts M 6 to secure the

cooker hood to the cover plate

1 cable clip for securing the exhaust

ducting to the exhaust stub.

Before installation, it is important to

read the information given on the

following pages as well as the

"Appliance dimensions" and the

"Warning and Safety instructions" at

the beginning of this booklet.

This is particularly crucial when

using the cooker hood at the same

time as a heating appliance that

relies on oxygen from the same

room, which could result in the

build-up of toxic fumes.

Installation instructions

See enclosed Installation sheet for

instructions on how to install this

appliance.

Special installation

instructions for recirculation

mode

(DA 420 V only)

In order to use the cooker hood in

recirculation mode, it has to be fitted

with a special conversion kit which is

available from the Spare Parts

Department (see "Technical data"). It is

supplied with its own fitting instructions.

After the cooker hood has been

installed, the charcoal filter has to be

fitted, and the operating hours counter

has to be set.