- ページ 33

換気フード Miele DA 424 V EXTのPDF 操作およびインストール手順をオンラインで閲覧またはダウンロードできます。Miele DA 424 V EXT 40 ページ。 With extended canopy
Miele DA 424 V EXT にも：操作およびインストール手順 (40 ページ), 製品寸法 (2 ページ), 操作および設置マニュアル (36 ページ), 操作およびインストール手順 (36 ページ), 操作およびインストール手順 (36 ページ), 操作およびインストール手順 (36 ページ)

ページを印刷する

All electrical work should be

undertaken by a suitably qualified

and competent person in strict

accordance with current national

and local safety regulations.

Installation, repairs and other work

by unqualified persons could be

dangerous, for which the

manufacturer cannot be held liable.

Ensure power is not supplied to the

appliance until after installation or

repair work has been carried out.

Do not connect the appliance to the

mains electricity supply by an

extension lead. These do not

guarantee the required safety of the

appliance.

The voltage and rated load are given

on the data plate. This is visible when

the grease filters have been removed.

Ensure that these match the household

mains supply.

Connection of this appliance should be

made via a suitable isolator which

complies with national and local safety

regulations and the On-Off switch

should be easily accessible after the

appliance has been built in.

When switched off there must be an

all-pole contact gap of 3 mm in the

switch (including switch, fuses and

relays according to EN 60 335).

Electrical connection

If the switch is not accessible after

installation (depending on country), an

additional means of disconnection must

be provided for all poles.

For extra safety, it is advisable to install

a residual current device (RCD) with a

trip current of 30 mA.

Important

This appliance is supplied for

connection to an AC single phase

230 V, 50 Hz supply.

The wires in the mains lead are

coloured in accordance with the

following code:

Green/yellow = earth

Blue

= neutral

Brown

= live

WARNING:

THIS APPLIANCE MUST BE

EARTHED