- ページ 32
換気フード Miele DA 5100 DのPDF 操作およびインストール手順をオンラインで閲覧またはダウンロードできます。Miele DA 5100 D 40 ページ。 Cooker
Miele DA 5100 D にも： 操作およびインストール手順 (36 ページ), 操作およびインストール手順 (36 ページ), インストレーション・インストラクション (1 ページ), 操作およびインストール手順 (36 ページ), 取付説明書 (15 ページ)
ページを印刷する
Operation with DSM 400 control module
The Miele DSM 400 control module can
be used to combine the cooker hood
with other components.
It enables the following:
Potential free connection
This can be used to operate a further
appliance via the On/Off button s on
the cooker hood.
The potential free contact on the
DSM 400
can, for example, be used
in a cooker hood with an external motor
...EXT, which is connected to a central
ducting system.
The contact can then be used to
operate an electrically driven non-return
flap
which is connected to the
central extraction unit
32
.
Components used in the central
ducting system are not supplied by
Miele.
If in any doubt, the advice of a
competent builder or, for gas, a Gas
Safe installer must be sought.
Connection to a light switch
The control module can be used to
switch on the cooker hood lighting and
also to dim it via a light switch in the
house.
Installation
The control module is fitted in the tower
after the cover plate has been
unscrewed from the ceiling.
The electrical connection of
components to the control module
must be carried out by a suitably
qualified and competent person.