- ページ 9

換気フード Miele DA6881IBのPDF 操作およびインストール手順をオンラインで閲覧またはダウンロードできます。Miele DA6881IB 40 ページ。 Downdraft

Proper installation



WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK,

OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:

– a) Installation work and electrical wiring must be done by qualified

person(s) in accordance with all applicable codes and standards,

including fire-rated construction.

– b) Sufficient air is needed for combustion and exhausting of gases

through the flue (chimney of fuel burning equipment to prevent

back drafting. Follow the heating equipment manufacturer's

guideline and safety standards such as those published by the

National Fire Protection Association (NFPA) and the American

Society for Heating, Refrigeration and Air Conditioning Engineers

(ASHRAE), and the local code authorities.

– c) When cutting or drilling into the wall or ceiling, do not damage

electrical wiring and other hidden utilities.

– d) Ducted hoods must always be vented to the outdoors.

– e) Do not use this hood with any solid-state speed control device.



To determine whether a ventilation hood may be operated above

your cooking appliance, please refer to the information provided by

the appliance's manufacturer.



Safety regulations prohibit the installation of a ventilation hood

above solid fuel stoves.



Insufficient distance between the cooking appliance and the

ventilation system can result in damage to the hood.

The minimum safety distances between the appliance and the

bottom of the ventilation system specified in the "Installation"

section must be maintained, unless the appliance's manufacturer or

local building codes has indicated that a greater distance is required.

If more than one cooking appliance is used beneath the ventilation

system, and if different minimum safety distances apply for these

appliances, you should use the greater distance.

IMPORTANT SAFETY INSTRUCTIONS