- ページ 26
換気フード Miele DAS 2920のPDF 操作およびインストール手順をオンラインで閲覧またはダウンロードできます。Miele DAS 2920 40 ページ。
Miele DAS 2920 にも： 操作およびインストール手順 (36 ページ)
ページを印刷する
Installation
Before installation
Before installation, it is important
to read the information given on the
following pages as well as the
"Warning and Safety instructions" at
the beginning of this booklet.
Installation recommendations
- To achieve optimum vapour
extraction, the rangehood must be
positioned centrally over the cooktop,
not to the side.
- The cooktop should be no wider than
the rangehood and, if possible, it
should be narrower, especially for
safety distances greater than
750 mm.
- The installation area must be easily
accessible. The rangehood should be
easily accessible and easy to
dismantle in the event that service is
required. This should be taken into
consideration when planning the
position of cupboards, shelves,
ceilings or features in the vicinity of
the rangehood.
Installation materials
1 exhaust connection
for exhaust ducting 150 mm.
26
1 non-return flap
for fitting into the exhaust connection
on the motor unit (not needed for
recirculation mode). Depending on
model, the non-return flap may already
be fitted.
4 mounting plates
for installation in a 600 mm wide
cabinet
2 brackets
for installation in a 900 mm wide
cabinet (only for 896 mm wide
appliances)
2 spring clips
for installation in a 900 mm wide
cabinet (only for 896 mm wide
appliances)
1 spacer strip
for concealing the gap between the
rear of the appliance and the wall