- ページ 25

ドライヤー Miele PDR 516 SL EL/GのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Miele PDR 516 SL EL/G 38 ページ。 Commercial tumble dryers

Starting a pro-

gramme

Programme run-

ning time/Time left

estimation

Energy saving

4. Starting a programme

Touch the flashing Start/Stop sensor control.



The Start/Stop sensor control will light up.

Programme sequence

- If Delay start has been selected, the Delay start time will start to

count down first.

- The programme starts.

The programme running time depends on the quantity of laundry, the

type of fabric and the residual moisture in the laundry. The displayed

programme running time for drying level programmes can therefore

vary or "jump". The tumble dryer's electronic module adapts during

the ongoing drying programme. The displayed programme running

time becomes more and more accurate.

When using the programmes for the first time, the displayed time

sometimes deviates significantly from the real time left. The differ-

ence between the estimated and achieved time becomes smaller if

the corresponding programme is run more often. If different load

sizes are dried in one programme, the time left display can only

show an approximate time.

Laundry items and fabrics can wear out unnecessarily.

Avoid overdrying the laundry.

After a programmed time, the indicators dim. The Start/Stop sensor

control flashes slowly.

Touch the Start/Stop sensor control to switch the indicators back



on.

Energy saving for the indicators will not affect a running programme.

- The laundry is cooled before the end of the programme in line with

the setting in the programmable function.

Drying