- ページ 2

レシーバー Allmatic B.RO MINI 1CHのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Allmatic B.RO MINI 1CH 2 ページ。 Programmable radio receiver, single relay output.
Allmatic B.RO MINI 1CH にも：マニュアル (8 ページ)

ページを印刷する

REMOVE A TRANSMITTER

1. Go near the receiver.

2. Press and keep pressed the hidden button of the transmitter you want to remove.

3. Without releasing the hidden button press the first button of the transmitter.

4. The LED on the receiver will blink 4 times. When the LED goes off, transmitter is removed.

Do not make this procedure if near other receivers/automations, this procedure will remove the transmitter

from every system into the range.

RESET

1. Cut power of the receiver.

2. Press and keep pressed the learning button of the receiver while giving power again.

3. When the LED goes off it is possible to leave the button. The receiver has been reset.

GUARANTEE

In compliance with legislation, the manufacturer's guarantee is valid from the date stamped on the product and is restricted to the repair or free

replacement of the parts accepted by the manufacturer as being defective due to poor quality materials or manufacturing defects. The guarantee

does not cover damage or defects caused by external agents, faulty maintenance, overloading, natural wear and tear, choice of incorrect product,

assembly errors, or any other cause not imputable to the manufacturer. Products that have been misused will not be guaranteed or repaired.

Printed specifications are only indicative. The manufacturer does not accept any responsibility for range reductions or malfunctions caused by

environmental interference. The manufacturer's responsibility for damage caused to persons resulting from accidents of any nature caused by our

defective products, are only those responsibilities that come under Italian law.

DISPOSAL OF THE PRODUCT

This product is an integral part of the automation, and therefore, they must be disposed of together. As for the installation operations, at the end

of the life of this product, the dismantling operations must be performed by qualified personnel. This product is made from different types of

materials: some can be recycled, others must be disposed of. Please inform yourselves on the recycling or disposal systems provided for by the laws

in force in your area, for this category of product.

CAUTION! – some parts of the product can contain polluting or dangerous substances which, if dispersed in the environment, may cause

serious harm to the environment and human health. As indicated by the symbol at the side, it is forbidden to throw this product into

domestic refuse. Therefore, follow the "separated collection" instructions for disposal, according to the methods provided for by local

regulations in force, or redeliver the product to the retailer at the moment of purchase of a new, equivalent product.

CAUTION! – the regulations in force at local level may envisage heavy sanctions in case of abusive disposal of this product.

ALLMATIC S.r.l

32026 Borgo Valbelluna - Belluno – Italy

Via dell'Artigiano, n°1 – Z.A.

Tel. 0437 751175 – 751163 r.a. Fax 0437 751065

www.allmatic.com - E-mail: [email protected]

2/2

ITA

ENG

FRA

ESP

DEU

POR

6-1620051

rev5

02/10/2020