- ページ 29

ドライヤー Miele PT 7401のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Miele PT 7401 36 ページ。 Innovationm tumble dryer
Miele PT 7401 にも：取扱説明書 (36 ページ)

This machine must only be installed and

commissioned by a Miele authorised

technician. In the U.K. gas heated

machines must be installed by a Corgi

registered fitter only.

Please observe the installation instructions

and the installation diagram supplied with

the machine. They are important for the

correct setting up and connection of the

machine.

The machine must not be transported

without its transport pallet in position.

Do not install the machine in a room where

there is a risk of frost occurring.

To ensure suitable access is maintained for

future maintenance and service work please

ensure that the minimum distances between

the machine and the wall specified on the

installation diagram are strictly observed.

Levelling the machine

This machine does not require a plinth. It

must, however, be aligned horizontally to

compensate for any unevenness in the floor.

Otherwise the correct functioning of the

machine may be impaired.

The screw feet (A) can be adjusted to align

the machine.

After aligning the machine correctly you

need to use a screwdriver to secure discs

(B) to the floor plate.

M.-Nr. 06 533 441

Notes for the installer

This dryer is fitted with an exhaust fan which

can be heard during operation.

If this noise disturbs you it is possible to fit a

silencer into the dryer's exhaust duct. These

are available from retail outlets.

Coin mechanism

This dryer can be fitted with a coin

mechanism.*

To do so a suitable adapter* is required. The

machine also has to be reprogrammed by a

Miele trained service technician.

All parts marked * are available from your

Miele Dealer or the Miele Spare Parts

Department.