ページを印刷する
Fittings (supplied) Without plinth
2 × clamps
2 × screws DIN 571 (Ø × length)
2 × rawl plugs (Ø × length)
Machine must be bolted to the floor!
Fixing materials for a floating screed floor are to be provided
on site.
On concrete platform
2 × clamps
2 × screws DIN 571 (Ø × length)
2 × rawl plugs (Ø × length)
Machine must be bolted to the floor!
Fixing materials for a floating screed floor are to be provided
on site.
Machine data
Unit width
Machine depth
Unit height
Casing width
Casing depth
Minimum width of delivery access to installation site
Recommended rear wall gap (measured to front of machine)
Min. wall gap (to rear edge of lid)
Net weight
Dynamic floor load, max.
Average heat dissipation
(dependent on ambient room temperature and programme
selected)
(measured at a distance of 1 m from the machine and at a
height of 1.6 m)1 m
Installation should only be carried out by authorised fitters in accordance with valid regulations!
Observe installation instructions when installing machine! All rights reserved! Measurements in mm.
Installationsplan / Installation plan: PT 8251/8253/8255/8257
Datum / Date: 12.01.2011
A Noise level
A Sound pressure level
mm
6 × 40
mm
10 × 50
mm
6 × 40
mm
10 × 50
mm
906
mm
852
mm
1400
mm
900
mm
747
mm
860
mm
1300
mm
500
kg
150
N
1624
W
512
dB (A)
68.6
dB (A)
55
Seite / Page: 10