- ページ 15

デスクトップ HP 260 G2 DMのPDF ハードウェア・リファレンス・マニュアルをオンラインで閲覧またはダウンロードできます。HP 260 G2 DM 33 ページ。 Desktop mini
HP 260 G2 DM にも：使用済み製品の分解手順 (15 ページ)

Removing and replacing a hard drive

IMPORTANT:

that you can transfer the data to the new hard drive.

Remove/disengage any security devices that prohibit opening the computer.

Remove all removable media, such as a USB flash drive, from the computer.

Turn off the computer properly through the operating system, and turn off any external devices.

Disconnect the power cord from the AC outlet and disconnect any external devices.

IMPORTANT:

as the system is plugged into an active AC outlet. You must disconnect the power cord to avoid damage

to the internal components of the computer.

If the computer is on a stand, remove the computer from the stand.

Remove the computer access panel.

Unplug the combined power and data cable from the hard drive (1). Use the pull tab on the cable

connector to unplug the cable. Then pull the release lever next to the rear of the hard drive outward (2).

While pulling the release lever out, slide the drive back until it stops, and then lift the drive up and out of

the bay (3).

Before you remove the old hard drive, be sure to back up the data from the old hard drive so

Regardless of the power-on state, voltage is always present on the system board as long

Removing and replacing a hard drive