- ページ 21

ドライヤー Miele T 6351のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Miele T 6351 32 ページ。 Tumble dryers
Miele T 6351 にも：取扱説明書 (26 ページ), 取扱説明書 (28 ページ)

Faults or interruptions are indicated by the

sequence lights/fault indicators flashing.

Heating

Fault in the heating system.

^ Call Miele's Technical Service Department.

Safety period

The maximum running time of the drying

program was exceeded because the resid-

ual moisture at the start of the program was

too high.

^ Restart the drying program.

^ If the fault message occurs again contact

the Miele Technical Service Department.

Venting

The venting duct is obstructed.

^ Check the vent ducting and clean if neces-

sary.

Lint filter

The lint filter is clogged.

^ Clean the lint filter at the end of the pro-

gram.

Note:

The "Drying", "Cool air" and

"Anti-crease" indicators will flash if there is a

power failure or if a program has been inter-

rupted (e.g. when a door has been opened).

They do not indicate a fault. The indicators

will stop flashing once the "Start" button is

pressed.

Fault indicators