- ページ 2
デスクトップ HP 290 G1 SFF BusinessのPDF 使用済み製品の分解手順をオンラインで閲覧またはダウンロードできます。HP 290 G1 SFF Business 5 ページ。
ページを印刷する
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Description T15 screw driver (Disassemble 4 pcs screws for HDD )
Description T15 screw driver (Disassemble 3 pcs screws for ODD-ODD cage and main bkt)
Description T15 screw driver (Disassemble 2 pcs screws for PCI cover and main bkt)
Description T15 screw driver (Disassemble 6 pcs screws for MB and main bkt)
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1.
Remove to lower case from hosing.
2. .Pull off ODD SATA con &HDD power con.
3. Remove ODD and Front Bezel from hosing
4. Loosen 3 screws on main bkt then remove ODD cage and loose 4 screws remove HDD
5. Pull off all cables on MB.
6. Loosen 6 screws on MB then remove it
7. Loosen 4 screws on PSU then remove it.
8.
9.
10.
11.
12.
13.
14.
15.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
1. Remove to lower case from housing.
Tool Size (if
applicable)
T15 3.0~4.0
kgf-cm
T15 3.0~4.0
kgf-cm
T15 3.0~4.0
kgf-cm
T15 3.0~4.0
kgf-cm