ページを印刷する
Ducting
Exhaust connection with a
flexible exhaust hose or rigid
pipe
Using the connector supplied, an
exhaust hose (4" [100 mm]
diameter) can be installed.
Necessary materials:
– a wall or window duct
(available from Miele)
– an exhaust hose made of approved
non-flammable material
^ Install the required connector*, 1,
with the exhaust hose or pipe, 2, to
the dryer.
* The white connector with clips is
used for connection to a hose; the
gray connector without clips is used
for connection to a pipe.
22
,
WARNING
Do not remove the restriction insert
in the vent opening. It may result in
poor drying results, damage to the
laundry and higher Carbon
monoxide emissions.
The exhaust duct must not be
connected or secured with screws
or other fastening devices which
extend into the interior of the duct.