- ページ 36

ドライヤー Miele TOUCHTRONIC T 8013 CのPDF 操作およびインストール手順をオンラインで閲覧またはダウンロードできます。Miele TOUCHTRONIC T 8013 C 40 ページ。 Large capacity vented dryer angled control
Miele TOUCHTRONIC T 8013 C にも: 操作およびインストール手順 (40 ページ), 寸法マニュアル (9 ページ)

Miele TOUCHTRONIC T 8013 C 操作およびインストール手順
Installation

External water drain

When drying is in progress, condensed
water is pumped into the condensed
water container through the drain hose
at the back of the dryer. The
condensed water can also be drained
directly if the machine is installed near
a sink or a standpipe so that the
condensed water container does not
have to be emptied.
Drain hose length . . . . . . . 4' 11" (1.5 m)
Maximum delivery
head . . . . . . . . . . . . . . . . . 4' 11" (1.5 m)
Maximum drain length. . . . . . 13 ft (4 m)
If the hose is not long enough, an
extension hose is available as an
optional accessory from the Miele.
Installing the drain hose
Do not pull or kink the drain hose, it
may be damaged!
^ The drain hose holds a small amount
of remaining water. Keep a container
at hand.
32
^ Pull the drain hose off the holder.
^ Drain remaining water in the
container.
^ Unwind the hose from the holder and
carefully pull it from the clamps.
^ Guide the hose depending on the
installation to the left or right.
^ Leave the hose in the middle clamp
to prevent the drain hose from
becoming kinked.