デスクトップ HP 705のPDF ユーザーノートをオンラインで閲覧またはダウンロードできます。HP 705 2 ページ。 2/4/9 - gb ultra wide se disk drive
HP 705 にも：ユーザーマニュアル (46 ページ), ユーザーノート (3 ページ), ユーザーノート (2 ページ), ユーザーノート (2 ページ), ユーザーノート (2 ページ), ディスク・ドライブ・インストール・マニュアル (2 ページ), ユーザーノート (2 ページ)

2–GB, 4–GB and 9–GB Ultra

Wide SE Disk Drive User Notes

Refer to your workstation owner's guide or your disk drive installation

guide for detailed information about installing your disk drive. During

the installation procedure, you may have to change the SCSI ID of your

disk drive. Refer to the appropriate illustration to set the SCSI ID

jumpers to the desired SCSI ID.

NOTICE:

We recommend that you use SCSI ID 6 for your

workstation's first hard disk drive, and SCSI ID

5 for the second hard disk drive.

Minimum Software Requirements

The 2–GB, 4–GB, and 9–GB disk drives are fully operational with HP-

UX Release 10.20 ACE (February 1998 or later). No additional software

patches are required.

The HP part numbers for these drives are:

Drive

Exchange Part No.

2–GB

A1658–69020

4–GB

A1658–69021

9–GB

A1658–69024

Part Number A1658–90715

Edition E0498

Printed in U.S.A.

*A1658-90715*

Spare Part No.

A1658–60020

A1658–60021

A1658–60024