ページを印刷する
Preparing for use
Attaching the suction hose
Insert the hose connector into the
suction socket on the vacuum
cleaner until it clicks into position. To
do this, line up the guides on the two
pieces.
Disconnecting the suction hose
Press the release buttons at the side
of the hose connector, and lift the
hose from the socket.
12
Connecting the suction hose to the
handle
(required depending on model)
Insert the suction hose into the han-
dle until it clicks into position.
Connecting the handle to the wand
Insert the handle into the wand until it
clicks into position. To do this, line up
the guides on the two pieces.
To release the handle from the wand,
press the release button and pull the
handle out of the wand, twisting it
slightly as you do so.