- ページ 43

デスクトップ HP 8100 - Elite Convertible Minitower PCのPDF 設定・構成マニュアルをオンラインで閲覧またはダウンロードできます。HP 8100 - Elite Convertible Minitower PC 48 ページ。 Hp compaq convertible minitower business pc
HP 8100 - Elite Convertible Minitower PC にも：仕様 (2 ページ), クイックセットアップとスタートマニュアル (21 ページ), サポート一覧 (34 ページ), ソフトウェア設定マニュアル (9 ページ), 図解パーツ＆サービスマップ (4 ページ)

Return to Default

Return to Default is also known as Unprovisioning.

An AMT Setup and Configured system can be unprovisioned. It is done through the

ME Platform Configuration Screen and the Un-Configure Network Access option.

Figure 21: Intel AMT Un-configure Network Screen

Depending on how the system was previously provisioned, one or both

unprovisioning options may appear.

1) Go into Unconfigure Network Access menu .

a. Select the needed Unprovision mode.

Full unprovisioning is available for Manual and Enterprise mode

provisioned systems. It will return all AMT Configuration settings to factory

defaults. All certificate hashes will be deleted and the default hash will be

made active. It does not reset all ME Configuration settings or passwords.

Partial unprovisioning is available for Enterprise mode provisioned systems.

Partial unprovisioning will return all AMT Configuration setting to factory

defaults with the exception of the PID, PPS, and PKI-CH. It does not reset

ME Configuration settings or passwords.

b. Un-provisioning message will appear. This usually takes about one minute.