ページを印刷する
Use
Power cord
Unwind the cord completely to
aid the vacuum in dissipating heat.
Do not pull or carry by the cord, use
the cord as a handle, close a door on
the cord, or pull the cord around
sharp edges or corners. Do not run
the appliance over the cord. Keep
the cord away from heated surfaces.
Do not unplug by pulling the cord. To
unplug grasp the plug, not the cord.
This appliance is equipped with a
power cord reel. Hold the plug when
rewinding onto cord reel. Do not al-
low plug to whip when rewinding.
Unwinding the cord
Pull the cord out to the required
length.
Insert the plug into the socket.
If your vacuum cleaner is equipped with
a lit park system for storage, it switches
on in this manner.
When the vacuum cleaner is used for
the first time the lighting will switch it-
self on after approximately two min-
utes.
If vacuuming for longer than
30 minutes, the cord must be pulled
out all the way. Danger of overheat-
ing and damage.
Rewinding the cord
Remove the plug from the outlet.
If your vacuum cleaner is equipped with
a lit park system for storage, it switches
off in this manner.
Step briefly on the automatic cord
rewind foot switch.
The cord will then retract itself fully into
the vacuum cleaner.
If you do not want the cord to retract
completely into the vacuum cleaner
you can deactivate this function. To do
this, take hold of the end of the cord
whilst retracting it and give it a short
pull when you want the rewinding to
end.
17