- ページ 7

デスクトップ HP 8710w - HP Mobile WorkstationのPDF マルチブート・ユーザー・マニュアルをオンラインで閲覧またはダウンロードできます。HP 8710w - HP Mobile Workstation 17 ページ。 Mobile workstation
HP 8710w - HP Mobile Workstation にも：クイックスペック (39 ページ), ユーザーマニュアル (15 ページ), ユーザーマニュアル (20 ページ), ソフトウェア・アップデート (12 ページ), ユーザーマニュアル (17 ページ), ユーザーマニュアル (20 ページ), ネットワーク・マニュアル (16 ページ), セキュリティ・マニュアル (35 ページ), ユーザーマニュアル (34 ページ), インストレーション・マニュアル (6 ページ), クイックスペック (46 ページ), クイックスペック (32 ページ)

About the boot device order

As the computer starts, the system attempts to boot from enabled boot devices. The MultiBoot utility,

which is enabled at the factory, controls the order in which the system selects a boot device. Boot devices

can include optical drives, diskette drives, a network interface card (NIC), hard drives, and USB devices.

Boot devices contain bootable media or files that the computer needs to start and operate properly.

NOTE:

Some boot devices must be enabled in Computer Setup before they can be included in the

boot order.

The factory setting is for the computer to select the boot device by searching enabled boot devices and

drive bay locations in the following order:

NOTE:

Some of the boot devices and drive bay locations listed may not be supported on your

computer.

●

MultiBay or optical drive

●

Internal hard drive

●

USB floppy

●

USB diskette on key

●

USB CD-ROM

●

USB SuperDisk

●

USB hard drive

●

Network controller

You can change the order in which the computer searches for a boot device by changing the boot order

in Computer Setup. You can also press

the lower-left corner of the screen when the computer starts up. Pressing

the current boot devices and allows you to select a boot device. Or, you can use MultiBoot Express to

set the computer to prompt you for a boot location each time the computer turns on or restarts.

If MultiBoot is disabled, the computer uses a fixed boot order that consists of first searching for a drive

A boot device. If none is found, the computer looks for a drive C boot device. Drive A boot devices

include optical drives and diskette drives. Drive C boot devices include optical drives and hard drives.

The NIC does not have an assigned drive letter.

NOTE:

An optical drive (such as a CD-ROM drive) can boot either as drive A or drive C, depending

on the format of the boot CD.

while the "F9 = Boot device menu" message is displayed in

displays a menu that shows