- ページ 12
掃除機 Miele HS11のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Miele HS11 21 ページ。
Miele HS11 にも： 取扱説明書 (32 ページ)
ページを印刷する
AirTeQ floorhead (dia. 9)
If the suction power of the AirTeQ
floorhead seems too high, reduce
the suction until the floorhead is
easier to manoeuvre (see "Use - To
regulate the suction power").
To activate the exhaust filter change
indicator
Depending on model, your vacuum
cleaner will be fitted as standard with
one of the following exhaust filters (dia.
10):
a AirClean
b Active AirClean 50 (black)
c HEPA AirClean 50 (white)
If your vacuum cleaner is fitted with
filter b or c, you need to activate the
exhaust filter change indicator.
^ Lift the release catch for the dust
compartment lid and raise the lid as
far as it will go (dia. 11).
^ Remove the indicator strips (dia. 12).
^ Press the exhaust filter change
indicator ~ (dia. 13).
^ After approx. 10 - 15 seconds a thin
red stripe will appear in the left hand
side of the display (dia. 14).
^ Close the dust compartment lid
securely, making sure it clicks into
position. Take care not to trap the
dustbag when doing so.
Exhaust filter change indicator
The exhaust filter change indicator
shows the remaining functional life of
the exhaust filter. After approx. 50
operating hours, or approx. one year of
average use, the display will be
completely filled with red (dia. 15).
Using the accessories
supplied (dia. 16)
The following accessories are supplied:
a Crevice nozzle
b Dusting brush
c Upholstery nozzle
To open the accessories
compartment (dia. 17)
^ Press the release button to open the
accessories compartment lid.
^ Take out the accessory you require.
^ Press down firmly on the lid to close
it.
Floorhead (dia. 18)
For general use and also for vacuuming
the stairs.
,
For safety reasons when
vacuuming stairs it is best to start at
the bottom of the stairs and move
upwards.
en
33